Справочник Пользователя для Atlantis Land NetServer Pro A02-PSU-W54_ME01
NetServer Pro
18
1. Device List: Display the connected print server within the network.
2. Control Buttons: Setup Wizard, Change IP Address, Update
2. Control Buttons: Setup Wizard, Change IP Address, Update
Firmware, Show Web Setup, Factory Reset, Print Test, Discover
Device, About,
Device, About,
and Close.
3. Information Field: Display the basic information of the selected print
server in the Device List.
4. Status Bar: Display the system status.
Before you can print over the network using your print server, you may
need to perform some basic setup tasks through PS-Utility. These
settings include:
Before you can print over the network using your print server, you may
need to perform some basic setup tasks through PS-Utility. These
settings include:
Change the print server’s IP Address: clicking the Change IP
Address button will bring up a dialog box that allows you to
change the IP Address of selected print server.
Address button will bring up a dialog box that allows you to
change the IP Address of selected print server.
Perform web configuration: click the Show Web Setup button
to open your web browser and launch the Configuration Utility;
alternately, you can double-click the selected print server in the
Device List to launch the Configuration Utility.
to open your web browser and launch the Configuration Utility;
alternately, you can double-click the selected print server in the
Device List to launch the Configuration Utility.