Инструкции Пользователя для AirLink AP671W

 31

Associated Clients 

Click ‘Show Active Clients’ button and a new popup window will 
appear which contains the information about all wireless clients 
connected to this access point. You can click ‘Refresh’ button in 
popup window to keep information up-to-date. 
 

MAC address 1~4 

Please input the MAC address of the wireless access point you wish 
to connect. 
 

Set Security 

Click this button to select an encryption mode for this wireless link, a 
popup window will appear. Please refer to Section 2.5 for detailed 
descriptions. 
 

 
After you finish with setting, please click ‘Apply’, and the following message will be displayed: 
After you clicked Apply, the following message will be displayed on your web browser:  
 

 

 
You can click “Continue” to back to previous setup page to continue on other setup procedures, 
or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds 
while router is rebooting).  
 

 
In this mode, the access point can act as a wireless repeater; it can be Station and AP at the 
same time. It can use Station function to connect to a Root AP and use AP function to service 
all wireless stations within its coverage.