Инструкции Пользователя для AirLink AP671W
36
Here are descriptions of every setup item:
Key Length
There are two types of WEP key length: 64-bit and 128-bit. Using
‘128-bit’ is safer than ’64-bit’, but will reduce some data transfer
performance.
‘128-bit’ is safer than ’64-bit’, but will reduce some data transfer
performance.
Key Format
There are two types of key format: ASCII and Hex. When you select
a key format, the number of characters of key will be displayed. For
example, if you select ’64-bit’ as key length, and ‘Hex’ as key format,
you’ll see the message at the right of ‘Key Format’ is ‘Hex (10
characters), which means the length of WEP key is 10 characters.
a key format, the number of characters of key will be displayed. For
example, if you select ’64-bit’ as key length, and ‘Hex’ as key format,
you’ll see the message at the right of ‘Key Format’ is ‘Hex (10
characters), which means the length of WEP key is 10 characters.
Default Tx Key
You can set up to four sets of WEP key, and you can decide which
key is being used by default here. If you don’t know which one you
should use, select ‘Key 1’.
key is being used by default here. If you don’t know which one you
should use, select ‘Key 1’.
Encryption Key 1 to 4
Input WEP key characters here, the number of characters must be
the same as the number displayed at ‘Key Format’ field. You can use
any alphanumerical characters (0-9, a-z, and A-Z) if you select
‘ASCII’ key format, and if you select ‘Hex’ as key format, you can use
characters 0-9, a-f, and A-F. You must enter at least one encryption
key here, and if you entered multiple WEP keys, they should not be
same with each other.
the same as the number displayed at ‘Key Format’ field. You can use
any alphanumerical characters (0-9, a-z, and A-Z) if you select
‘ASCII’ key format, and if you select ‘Hex’ as key format, you can use
characters 0-9, a-f, and A-F. You must enter at least one encryption
key here, and if you entered multiple WEP keys, they should not be
same with each other.
Enable 802.1x
Authentication
Authentication
Check this box to enable 802.1x user authentication. Please refer to
Section 2-7-5 for detailed instructions.
Section 2-7-5 for detailed instructions.