Инструкции Пользователя для AirLink AP671W

 44

 
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network 
clients and this access point. You don’t have to select encryption mode and input a long 
encryption passphrase every time when you need to set up a wireless client, you only have to 
press a button on wireless client and this access point, and the WPS will do the setup for you. 
 
This access point supports two types of WPS: Push-Button Configuration (PBC), and PIN code. 
If you want to use PBC, you have to switch this access point to WPS mode and push a specific 
button on the wireless client to start WPS mode. You can push Reset/WPS button of this access 
point, or click ‘Start PBC’ button in the web configuration interface to do this; if you want to use 
PIN code, you have to provide the PIN code of the wireless client you wish to connect to this 
access point and then switch the wireless client to WPS mode. The detailed instructions are 
listed follow: 
 
 
 
 
 
 
To use WPS function to set encrypted connection between this access point and WPS-enabled 
wireless client by WPS, click ‘WPS Setting’ on the left of web management menu, and the 
following information will be displayed: 
 

 

 
Here are descriptions of every setup item: 
 

Enable WPS 

Check this box to enable or disable WPS function.