Справочник Пользователя для Allmand Marine Lighting 8330

11

ƒ

IF THE TOWER CANNOT BE ROTATED
AFTER LOOSENING THE BLACK KNOB,
CHECK TO ASSURE THE LOWER
LATCH IS ENGAGED IN THE STRIKE
PLATE.  THIS DOUBLE LATCH FEATURE
PREVENTS THE TOWER FROM BEING
ROTATED IF THE LATCH IS NOT EN-
GAGED.

 

 

VISUALLY INSPECT EQUIPMENT FOR
DAMAGE BEFORE OPERATING. ALLOW
ADEQUATE CLEARANCE AROUND
TRAILER FOR TOWER AND INSURE THAT
NO PERSONS ARE STANDING IN FRONT
OF OR BEHIND UNIT WHEN LOWERING.

1. Turn off lights.
2. Release black knob and rotate tower until

winch handle points to the front of the trailer
and retighten knob.

3. Operate hand crank winch on tower counter-

clockwise to lower the lights to the lowest
vertical position

4. Operate hand crank winch on side of trailer

clockwise to take up any cable slack.

5. Turn the black knob counterclockwise and lift to

release the latch from the strike plate. Re-
tighten the knob with the latch disengaged from
the strike plate.

6. Operate the hand crank on the side of the

trailer counterclockwise to fold the mast
down into the towing position

.

.

7. Secure light cords into hook on the rear

tower support for towing.

8. Secure pin locking mast to rear tower

support.

9. Remove ground rod from earth. Discon-

nect wire from ground lug and secure in
trailer

10. Raise jacks and rear stand, retract

outriggers and secure for towing