Инструкции Пользователя для Brother HL-2400CEN

CHAPTER 4 CONTROL PANEL

4–65

 

 This factory setting for the automatic emulation selection function is ON.
The printer will select the emulation mode automatically when it receives
data from the computer.
 
 To set the emulation mode manually, hold down the 

 button and

press the 

 button. Then enter the setting mode to change the

emulation.
 
 To set the emulation mode, follow these steps:
 
 

1.

Press the 

 button to take the printer off-line.

 
 

2.

Hold down the 

 button and press the 

 button.

 

When you enter the setting mode, the display first shows the

current emulation mode with an asterisk.

 

3.  

Press the ▲ or ▼ button until the emulation mode you want

 

appears on the display.

 

Display Message

Emulation Mode

AUTO

HP PCL5C

HP PCL5C

BR-Script 2

BR-Script level 2 mode

HP-GL

HP-GL Plotter Mode

EPSON FX-850

EPSON FX-850

IBM ProprinterXL

IBM Proprinter XL

 
 

4.

Press the 

 button to make the displayed selection effective.

 When you select any specific emulation mode other than
“AUTO,” for a short time an asterisk appears at the end of the
display. Then the printer automatically exits from the setting
mode to the off-line mode. 
 When you select “AUTO,” the sub-item “Time Out” for the
automatic emulation selection appears on the display. Go to the
next step.

 
 

5.

Set “Time Out” with the ▲ or ▼ button.

 

This time out is the duration during which the printer will not

allow another automatic emulation change. You can set it from
1 second to 99 seconds:  the factory setting is 5 seconds.

 
 

6.

Press the 

 button.

 

The next sub-item “EPSON/IBM” appears on the display.