Справочник Пользователя для Beko 42WLU530HID

28 

Enter into the 

SETUP menu from the Main 

Menu by pressing the 

MENU button in the 

PC mode. In order to make the necessary 

settings in this menu, you can use the 

left, up-down movement buttons on your 

remote control. You can make the following 

settings for your monitor in this menu.
9.2.4-HORIZONTAL POSITION:  

Horizontal position setting
9.2.5-VERTICAL POSITION: Vertical 

position setting 

This is the pixel clock frequency. User can 

narrow down or enlarge the display by 

selecting a desired value.

Using the 

right/left movement buttons, you 

can ensure that the colors and shapes are 

exactly consolidated on the PC image.
9.2.8-AUTOCONFIGURATION
The most suitable geometric settings 

in accordance with the input signal 

are configured by this function. 

For this operation, select the 

AUTOCONFIGURATION tab and press 

OK button. You can adjust the volume level 

of the source you have connected to the 

Audio-In input at the back of your TV by 

using the 

VOL+/VOL- buttons.

You can select the PC image to be displayed 

in 16:9, 14:9 or 4:3 formats.

Note 1: 4:3, 16:9 and 14:9 picture formats 

are supported in 16:9 panels. Only 4:3 

picture format is supported in 4:3 panels.
Note 2: In the Monitor mode, you can make 

the Brightness, Contrast, Sharpness, Red, 

Green and Blue Settings from the 

PICTURE 

menu.

Connect to the HDMI input at the back of 

your TV by using the connector located on 

your PC or your digital video-transmission 

device with a suitable cable (not supplied 

with the TV).
Note 1: To be able to watch an image in 

the HDMI mode, your computer must be 

equipped with a HDMI graphic card.
You may display the resolution information 

by pressing the 

INFO button.

Note 2: Scart1 To connect a RGB-

supported external device to your television, 

you must use a Scart cable supporting RGB. 

In this case, if your external device supports, 

you can set the output as RGB.

Your TV supports HDCP feature. To use 

this feature, you must set up a connection 

to your TV set’s HDMI video port and select 

HDMI by pressing the 

AV key on your 

remote control.

Digital Satellite Receiver

Video Recorder

Rear of the Television

Scart 1 TV In/Out

Scart 2 AUX In

Ant In

Ant Out

Ant In

Ant Out

Ant In

SCART Socket

SCART socket