Справочник Пользователя для Wyse Network Router 1

Using and Configuring Access Connections

• New - Opens the PPTP Property dialog box. Use this dialog box to create a new 

connection entry in the list of connections.

• Edit - Opens the PPTP Property dialog box for a currently-selected list entry. Use this 

dialog box to edit the connection.

• Delete - Deletes the PPTP property record for a currently-selected list entry. A warning 

is displayed, asking you to confirm the deletion.

Deleting the record is irreversible. A deleted record must be recreated to be 
made available again.

PPTP parameters for each PPTP entry are entered using the PPTP Property dialog box.

Use the following guidelines:
• PPTP Description - Enter the descriptive name that will appear in the PPTP Manager 

list of entries.

• PPTP Servers - List of IP addresses or host names with optional TCP port number of 

PPTP servers. Each entry with optional port number is specified as Name-or-IP:port, 
where :port is optional; if not specified, port 80 is used.

• Login Username, Password, and Domain - Enter the login name, password, and 

domain required for this connection.

• Auto-connect on system startup - When selected, causes the connection to be 

made automatically on system startup. (default is cleared).

• Show progress in detail - When selected, enables a PPTP Status dialog box opens 

(after connection initiation and a path to an enterprise PPTP VPN server is available) 
displaying messages and allowing you to refresh or disconnect the connection.

• Enable MPPC - When selected, enables Microsoft Point-to-Point Compression. The 

MPPC scheme is a means of representing arbitrary Point-to-Point Protocol (PPP) 
packets in a compressed form. The MPPC algorithm is designed to optimize processor 
utilization and bandwidth utilization in order to support a large number of simultaneous 
connections. The MPPC algorithm is also optimized to work efficiently in typical PPP 
scenarios (1500 byte MTU, and so on).