Справочник Пользователя для McDATA ULTRANETTM EDGE STORAGE ROUTER 3000

 

•

The options selectable from this dialog box are limited by the 
license key for the node. If the license key does not provide 
support for the Fail Over and Load Balancing network routing 
types, only the Dedicated Circuit network routing type is 
selectable, and all other options on this dialog are grayed out.

•

If you have not entered the licensing information for each node in 
the circuit using the License Wizard, only the Dedicated Circuit 
network routing type is selectable from this dialog box.

•

If you want to change the Network Routing Type after you have 
created the data paths, double-click the F/C interface on the 
Network Map. Click the Network button at the bottom of the F/C 
interface dialog box (FC10 - Node10) and select the Network 
Routing Type. You do not need to create the data paths again to 
change the Network Routing Type.

6. Click Next. The FICON Create Data Path Wizard - Choose Data 

 dialog appears.

7. If peer-to-peer VTS will be running on this data path, check the 

 check box. If this option is 

selected, FICON Tape Pipelining parameters will be set to the 
values found optimal for the Peer to Peer VTS application.

8. Select the port type for the FICON interface from the FICON Port 

 section.