Справочник Пользователя для McDATA ULTRANETTM EDGE STORAGE ROUTER 3000

— For a recessed mount, position the brackets so they are 

extended from the front of the UltraNet Edge 3000 unit 
approximately 3 1/4”. Attach the brackets using the rear holes 
(see illustration below).

Using a screw longer than 1/4 inch will impinge on the power supply 

and make it impossible to remove.

2. Position the UltraNet Edge 3000 unit in the rack. It may be 

necessary to tilt the unit approximately six inches or so to clear 
the rack mounting rails (a 4U opening is needed to accomplish 
this).

3. Using a #2 Phillips screwdriver and four screws (two for each 

bracket) designed for the rack, attach the UltraNet Edge 3000 with 
the bracket ears to the equipment rack.

Sb082

Bracket Ear (2)

6-32 Flathead Undercut Screws (8)

Sb083

10-32 Screws

Approximately

6”

Equipment Rack
Mounting Rails