Справочник Пользователя для Mitsubishi Electronics SILVER DIGIPLATER SDP-ECO 1630 III

SDP-Eco1630 III USERS MANUAL

•

Switch the mode between remote and local

Remote Mode

Local Mode

Start OK

Plate Data>

•

Shift between commands (Example)

1st hierarchy

Maintenance>

2nd hierarchy

Cutter Processor>

Ver SCSI-ID>

•

Command execution

There are two types of commands: one which activates machine functions
such as preliminary feeding and cutter-processor commands, and one which is
used, for example, to set numerical values.

For commands in which numerical values can be changed (Example:
Referring to P27 "4.4 Data input for the set plate")
Use the

to move the cursor to the numerical value display. Press the

key to start the display flashing and change the displayed value. (In

some modes the numerical value display starts flashing from the time it is first
displayed.)
The

key increases/decreases a numerical value.

Press the

key when the desired number appears.

If you wish to reset a value or interrupt the setting procedure, press the
key to return to the upper menu level without changing the currently set value
and re-start the setting procedure from the beginning by selecting the same
command.
For commands in which numerical values can not be changed (Example:
Referring to P28 "4.5 Execution of Pre. Feed command")
Use the

to select the desired command. Then press the

key to

execute it.

Repeatedly press the

key until Start OK is displayed to return to the on-

line mode.

ENT.

- 40 -