Справочник Пользователя для Buffalo Technology AirStation Pro WLA-AWCG
Getting Started 8
WLA-AWCG User Manual
WLA-AWCG User Manual
Warranty Card
Antenna connector
2.2.2 Software requirements
The AirStation Pro requires the following software to operate:
Windows 95/98/ME, NT or 2000
Internet Explorer 4.0 or higher, or Netscape Navigator 4.0 or higher
Internet Explorer is installed as standard on Windows 98 and Windows 2000.
Internet Explorer is installed as standard on Windows 98 and Windows 2000.
AirStation Manager software
Client Manager software (if you have a Wireless Client)
The AirStation Manager and Client Manager software is provided on the AirStation
Series Driver CD. For instructions on installing the software see:
Series Driver CD. For instructions on installing the software see:
“Installing the AirStation Manager Software” on page 33
Refer to the WLI-PCM-L11 Wireless LAN card User Manual.
Initial setup
To connect all the hardware supplied with the AirStation Pro pack and set up the
system, follow these steps.
system, follow these steps.
1
Connect the AirStation Pro to a power supply, using the AC/DC power
adapter.
Do not use any adapter other than that which is supplied with the AirStation
Pro.
adapter.
Do not use any adapter other than that which is supplied with the AirStation
Pro.
The AirStation Pro power light will display green.
2
Connect one end of the straight-through cable to the AirStation Pro LAN port.
3
Connect the cable to the PC/Hub.
The procedure for this step differs, depending on whether you are connecting
the AirStation Pro directly to a PC or to a hub.
The procedure for this step differs, depending on whether you are connecting
the AirStation Pro directly to a PC or to a hub.
Connecting directly to a PC
Connect the other end of the cross-over cable directly to your PC.