Справочник Пользователя для Insignia HD16

Document 900.0345 Rev 1.02

17

03/07

Use regular liquid cleaners to remove most dirt and grime from the HD16 
enclosure.

Do not use harsh or abrasive cleaners which can scratch the 
polycarbonate dome and reduce visibility from the camera.

If the polycarbonate dome is damaged or scratched beyond use, contact your 
distributor or salesperson to order a dome replacement. To replace the HD16 
dome:

1.

Use the security hex key (supplied) to loosen the #8-32 security screws 
securing the HD16 lid to the base.

2.

Use a Phillips screwdriver to remove the #6 x 1/4 inch Hi-lo tapping screws 
that attach the dome retainer plate to the front cover.

3.

Remove the damaged dome and replace it with the new dome.

4.

Use a Phillips screwdriver to attach the dome retainer plate to the HD16 front 
plate with the screws you removed in 

.

5.

Use the security hex key to tighten the security screws that secure the HD16 
lid to the base.

#8-32 security screws (x4)

Front cover

Polycarbonate dome

Dome turret

Gasket

Retainer plate

#6 x 1/4 inch Hi-lo tapping screws (x4)