Инструкция С Настройками для Avanti MOM9705
3
6) Installation of the upper side of the Metal bracket to the Microwave:
Using the Allen wrench (included remove the (2) two self tapping screws (1) from each of the lower rear
corners at the back of the Microwave oven.
Place the Microwave oven in place and align the holes (A) and (B) to the lower rear holes of the Microwave
oven. Replace the screws removed previously using the Allen wrench. See illustration # 4.
Illustration # 4
7) Side view of completed installation.
Once you have completed all 6 of the above steps the completed Metal bracket will appear as shown in
illustration # 5.
Illustration # 5