Инструкции По Установке для Maytag MDE17PRAYW

2.  Connect neutral wire to center terminal block.

3.  Connect remaining wires to outer terminal block.

Connecting Ground and Neutral Wires (cont.)
2.  Connect ground and neutral wire to center terminal block.

Connecting Direct Wire Ground
3.  Connect ground wire (green or bare) with external ground 

connector screw.

Direct wire cable must have 5 ft. (1.52 m) of extra length so 

dryer can be moved if needed.
Strip 3

1

⁄

2

" (89 mm) of outer covering from end of cable. Strip 

insulation back 1" (25 mm). If using 3-wire cable with ground 

wire, cut bare wire even with outer covering. Shape ends of 

wires into a hook shape.
Connecting Neutral Wire
1.  Loosen or remove center terminal block screw.

Connecting Remaining Wires
4.  Connect remaining wires to outer terminal block.