Справочник Пользователя для Sunpentown WA1222S
Timer operation (Auto-start or Auto-stop)
Press the TIMER button to initiate the Auto-start and/or Auto-stop program.
Timer can be set up to 24 hours.
1. Press the TIMER button to program Timer-On or Timer-Off, the corresponding indicator will
illuminate on unit’s control panel.
2. Press or hold the UP/DOWN keys to program time in 0.5 hour increments, up to 10 hours, then
in 1 hour increments up to 24 hours. Control will count down the remaining time.
3. The programmed time will register after 5 seconds and panel will revert back to displaying the
previous temperature setting.
Timer can be set up to 24 hours.
1. Press the TIMER button to program Timer-On or Timer-Off, the corresponding indicator will
illuminate on unit’s control panel.
2. Press or hold the UP/DOWN keys to program time in 0.5 hour increments, up to 10 hours, then
in 1 hour increments up to 24 hours. Control will count down the remaining time.
3. The programmed time will register after 5 seconds and panel will revert back to displaying the
previous temperature setting.
NOTE:
· Turning the unit ON or OFF at any time will cancel programmed timer.
· Adjusting time to 0.0 will also cancel TIMER setting.
· Turning the unit ON or OFF at any time will cancel programmed timer.
· Adjusting time to 0.0 will also cancel TIMER setting.
2
1
2
MODE
TIMER
SPEED
ONE
TOUCH
SLEEP
2
1
2
MODE
TIMER
SPEED
ONE
TOUCH
SLEEP
AUTO OFF → AUTO START
This feature is useful when you want to stop the air conditioner after you go to bed and start it
again in the morning when you wake up or when you return home.
This feature is useful when you want to stop the air conditioner after you go to bed and start it
again in the morning when you wake up or when you return home.
Example:
To stop the air conditioner after 2 hours and start it again in 10 hours.
1. Press the TIMER button until the TIMER-OFF indicator is displayed on unit's control panel.
2. Use the UP/DOWN button to set “2.0” hours.
3. Press the TIMER button again until TIMER-ON is displayed on control panel.
4. Use the UP/DOWN button to set “10” hours.
5. Wait for 5 seconds for program to be registered and panel to revert back to previous display.
To stop the air conditioner after 2 hours and start it again in 10 hours.
1. Press the TIMER button until the TIMER-OFF indicator is displayed on unit's control panel.
2. Use the UP/DOWN button to set “2.0” hours.
3. Press the TIMER button again until TIMER-ON is displayed on control panel.
4. Use the UP/DOWN button to set “10” hours.
5. Wait for 5 seconds for program to be registered and panel to revert back to previous display.
Timer operation (Combined)
You can program both Timer-On and Timer-Off simultaneously.
You can program both Timer-On and Timer-Off simultaneously.
13
AUTO START → AUTO OFF
This feature is useful when you want to start the air conditioner before you wake up and stop it
after you leave the house.
This feature is useful when you want to start the air conditioner before you wake up and stop it
after you leave the house.
Example:
To start the air conditioner in 5 hours and stop it after 8 hours:
1. Press the TIMER button until the TIMER-ON indicator is displayed on unit's control panel.
2. Use the UP/DOWN button to set “5.0” hours.
3. Press the TIMER button again until TIMER-OFF is displayed on control panel.
4. Use the UP/DOWN button to set “8” hours.
Wait for 5 seconds for program to be registered and panel to revert back to previous display.
To start the air conditioner in 5 hours and stop it after 8 hours:
1. Press the TIMER button until the TIMER-ON indicator is displayed on unit's control panel.
2. Use the UP/DOWN button to set “5.0” hours.
3. Press the TIMER button again until TIMER-OFF is displayed on control panel.
4. Use the UP/DOWN button to set “8” hours.
Wait for 5 seconds for program to be registered and panel to revert back to previous display.
Lowest Voltage of CPU Emitting Signal
Rated Voltage
5m
3.0V( Dry batteries Lr03x2)
2.4V
Remote Controller Specifications
Environment
Signal Receiving Range
NOTE: All the illustrations are for explanation purposes only. The actual shape of remote controller may be slightly different.
-5°C ~ 60°C (23°F ~ 140°F)
The design and specifications are subject to change without prior notice for product
improvement. Consult with the manufacturer for details.
improvement. Consult with the manufacturer for details.