Инструкции По Установке для Dacor RNR30NIS

Installation Instructions

Electrical Connection (cont.)

•  Do not connect the green appliance wire to the neutral 

(white) supply wire unless local building codes permit.

•  Do not ground the appliance to a gas supply pipe or hot 

water pipe.

•  A grounded cold water pipe must have metal continuity to 

electrical ground and must not be interrupted by insulating 

materials. Any insulating materials must be jumped with a 

length of No. 4 copper wire securely clamped to bare metal 

at both ends. See below.

1.  With the range positioned directly in front of the cabinet 

cutout, feed the appliance wires into the junction box. 

2.  Connect the white wire from the appliance to the neutral 

(white) supply wire inside the junction box.

3.  Connect the black wire from the appliance to the black (L1) 

power supply wire inside the junction box.

4.  Connect the red wire from the appliance to the red (L2) power 

supply wire inside the junction box.

5.  If using a 4-wire connection, connect the green wire to a 

grounded supply wire in the junction box or to a grounded 

cold water pipe. If connecting to a grounded cold water pipe, 

use a separate copper grounding wire (No. 10 minimum) to 

connect to the cold water pipe by means of a clamp and an 

external grounding connector screw.

6.  Replace the junction box cover.

RED
RED

GREEN

WHITE
WHITE

BLACK
BLACK

GREEN

Conduit to  

appliance

Wire nut 

4 places

Connection to house 

power supply

Junction box

Meter or other 

insulating device

Bare metal

Metal

water pipe

Clamps

No. 4

copper wire