Инструкции По Установке для Speed Queen ASEE8AGW173TW01

DRY2601N_SVG

Figure 17

Plug In the Dryer

Electric Dryer

Connect the dryer to an electrical power source. Refer to Electric
Dryer Only - Connect Electrical Plug for information on con-
necting power cord.

Connect to 30 Amp circuit.

D275I_SVG

Figure 18

Gas Dryer

Dryer requires 120 Volt, 60 Hertz electrical supply and comes
equipped with a 3-prong earth/ground plug. Refer to serial plate
for specific electrical requirements.
NOTE: The wiring diagram is located behind the con-
trol panel, inside the control cabinet.

WARNING

To reduce the risk of fire, electric shock, serious in-
jury or death, all wiring and grounding MUST con-
form with the latest edition of the National Electrical
Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1, and such local regulations as
might apply. It is the customer’s responsibility to
have the wiring and fuses installed by a qualified
electrician to make sure adequate electrical power is
available to the dryer.

W521

When plugging in the dryer:

• DO NOT overload circuits.
• DO NOT use an extension cord.
• DO NOT use an adapter.
• DO NOT operate other appliances on the same circuit. Use

separately fused 15 Amp circuits.

The dryer is designed to be operated on a separate branch, polar-
ized, three-wire, effective earth/ground, 120 Volt, 60 Hertz, AC
(alternating current) circuit protected by a 15 Ampere fuse,
equivalent fusetron or circuit breaker.

The three-prong earth/ground plug on the power cord should be
plugged directly into a polarized three-slot effective earth/ground
receptacle rated 120 Volts AC (alternating current) 15 Amps. Re-
fer to Figure 19 to determine correct polarity of the wall recepta-
cle.

Installation

Part No. 514364R2