Инструкции Пользователя для Danby DPA100D1XDD

Timer mode
• 

When the unit is plugged in, but the Power button has not been pressed, the unit is in Standby mode. To set an au-
tomatic time after which the unit should turn on, press the Timer button while the unit is in Standby mode. While the 
display is fl ashing, use the Up/ Down buttons to select a time between 0 and 24 hours.  The unit will come on AFTER 
the number of hours that you have selected have passed e.g. if you select 6 H, the unit will come on after 6 hours. 
The Timer symbol on the display will light up to indicate that the Timer has been set.  

• 

To set the duration of the run time using the Timer, the unit must be running (not in stand-by mode).  When the unit is 
running, press the Timer button.  While the display is fl ashing, use the Up/ Down buttons to select a time between 0 
and 24 hours.  The unit will run for the number of hours that you selected e.g. if you selected 6 H, the unit will run for a 
period of 6 hours. The Timer symbol will light up to indicate that the Timer has been set. 

• 

To turn the Timer function off, press the Timer button.  The display will start to fl ash.  While it is fl ashing, press the 
Down button to bring the time down to 0.  When the display stops fl ashing, the Timer symbol should disappear from 
the display, to indicate that the Timer is off.   

8

• 

If the internal container is full of water, the display screen will 
display “FL”, and the compressor will stop working automatical-
ly. Turn the unit off, unplug it, unscrew the drain cover, pull out 
the water plug to drain out the water, and the compressor will 
return to normal after being restarted. Ensure that you position 
the unit over a fl oor drain to avoid water spills on your fl oor.