Инструкции По Установке для Maytag MGD7100DC

Using a Phillips screwdriver, remove the 4 screws from the 

outer window retainer and lift off the trim ring off the window 

(A). Rotate trim ring 180° and secure with the 4 screws 

removed earlier (B). 

Handle

Fig. A

Fig. B

Handle

With the edge with 2 notches at the top, align the notches 

on the outer window assembly with the tabs on the trim ring 

and lower into place as shown in figure A. Rotate the outer 

window assembly counterclockwise to lock tabs into place 

(figure B). Using a Phillips screwdriver, secure with 2 screws 

removed earlier.

IMPORTANT: Do not overtighten.

Fig. A

Fig. B

Bottom 

of door

Notches