Инструкции Пользователя для Asko T884XLHPW
17
Customer Care Center, 1-800-898-1879, www.askona.com
INSTALLATION
How to assemble the stack:
1. Undo the screw on the back of the ASKO washing
machine as shown in the figure.
2. Secure the anti-tilt device using the screws as shown
in the picture.
3. Take the other anti-tipping bracket from the bag and
attach it on the dryer with two screws as shown in the
figure.
4. Place the two rubber feet on the front feet of the dryer.
5. Fasten or undo the rear feet of the appliance until
it is fully level, either on the floor or on the washing
machine.
6. Slide the dryer backward until it reaches the anti-
tipping bracket. Make sure the front of the appliance is
raised by 50 to 150 mm as you slide it back.
ADJUSTING THE FEET
Screw the feet in or out so that the tumble dryer is steady
and balanced on the floor or on the washing machine.