Инструкция для Bosch HEIP054U

English 11

To turn on the small inner element only, push in on the 

control knob and turn it to the 

 symbol 

(counterclockwise). Turn knob left or right to set the heat 
level.

To turn on the inner and middle elements, push in and turn 
the control knob to the 

 symbol. Turn knob left or right to 

set the heat level.

To turn on all three elements, push in and turn the control 

knob to the 

 icon. Turn knob left or right to set the heat 

level.

For each of the three element sets (A,B,C)  the unit 
temperature can be adjusted from LO to HI to provide a 
more precise temperature setting.

The warming zone is controled through the oven control 
panel.

To turn on the warming zone
1. Press the Warming Zone touchpad.
2. Press Enter.

To turn off the warming zone
1. Press the Warming Zone touchpad.

There is an embedded panel near the front of the cooktop 
with individual lights representing each element. These 
lights are illluminated when an element is “on”. The light 
remains on as long as the element is hot. When the 
element is sufficiently cooled down, the light goes out.

Cooktops with a triple front element

Cooktops with a double front element

All surface elements are automatically disabled during Self-
Clean Operation only. This is normal. Once the Self-Clean 
cycle is complete and the oven has cooled, the elements 
become operable once again.

9 WARNING

To avoid risk of personal injury, while the self clean 
cycle is operating, do not operate the cook top and 
ensure that all surface controls are turned off.