Руководство По Установке для Best CC34IQSB

- 4 -

The hood is operated using the (5) push-buttons located on the hood and the remote control.
LED colors are displayed on hood control only.

(P1) Delay- Off Switch
•  Your hood includes a 10 minute blower delay off switch. Press this switch once to activate the

timer and the LED Ring (L1) flashes blue. The blower will continue to operate for 10 minutes. 

After 10 minutes, the blower turns off automatically. 

•  To cancel the 10-minute delay, press the delay switch once again.

(P2) Filter Alarm Switch
•  After 30 hours of blower operation, the filter alarm is activated and the LED ring (L1) turns red/

flashes. It indicates that the grease filters need to be cleaned.

•  After cleaning the grease filters, reset the hour counter by pressing the Filter Alarm/Timer Reset

button (P2) during display of the alarm.

(P3) Blower Speed Decrease and Off Switch 
•  Press  to  decrease  blower  speed,  high  to  low. The  LED  ring  (L1)  flashes  blue  at  a  speed

proportionate to the blower setting (i.e.: four flashes is high speed, one flash is low speed, etc.)

•  Continue pressing this switch to turn the blower off.

(P4) Blower Speed Increase and On Switch
•  Press this switch to turn the blower on to low speed.
•  Press again to increase blower speed, low to high. The LED ring (L1) flashes blue at a speed

proportionate to the blower setting (i.e.: four flashes is high speed, one flash is low speed, etc.)

(P5) Light Switch
Turns the lights on and off.

P1:  

Activate/deactivate delay-off (10 minute)

P2:  Filter change indication timer reset
P3:  

Decreases fan motor speed until turned off (4>3>2>1>OFF)

P4:  

Turns fan motor on and increased speed (ON>1>2>3>4)

P5:  Turns lights on/off
L1:  LED Indicator Ring Signalling crown:
      - Hood in standby: lights up green. 30 seconds after
        the last key has been pressed the crown turns off
     

- Motor on: L1 lights up blue 

 The

       

 frequency is proportional to the speed setting.

- 10’ TIMER function : L1 lights up and flashes blue.
- Filter alarm active: L1 lights up red

If the blower and/or the lights are on continuously for 10 hours without any user interaction with 

the controls, the hood will automatically shut off. Press any control button to re-activate the hood.