Инструкции По Установке для Best UP26M42SB
5
1. SELECT BLOWER OPTION AND INSTALL DUCTWORK
Either an interior or exterior blower or in-line blower may be used with this hood. The Best UP26M must be installed with blower models iQ6,
P3, P5, P6, P8, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted. (Blowers sold separately).
P3, P5, P6, P8, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted. (Blowers sold separately).
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 3, 5, 8, 11, 12, 16 and up of this
manual.
manual.
Install proper-sized ductwork, elbow(s) and roof or wall cap for the type of blower you are installing. If using 7” or 8” round ducts, use a
transition. Use 2” metal foil duct tape to seal duct joints.
transition. Use 2” metal foil duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 24”. A maximum of 36” above cooktop is highly recommended
for best capture of cooking impurities.
for best capture of cooking impurities.
Distances over 36” are at the installer and users discretion.
3¼
”
x 10
”
OR 3¼
”
x 14
”
HH0213A
24” TO 36”
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
CAP
HOOD
7” OR 8”
ROUND DUCT
3¼”
X
10” TO 7”
OR 8” TRANSITION
OR 3¼”
X
14” TO 8”
TRANSITION
HH0214A
24” TO 36”
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
CAP
HOOD
HOOD
10” ROUND DUCT
EXTERIOR BLOWER
HH0217A
EXTERIOR
BLOWER
24” TO 36”
ABOVE COOKING SURFACE
MODEL P5 (SINGLE) OR P8 (DOUBLE)
INTERIOR BLOWER
TYPICAL RECTANGULAR DUCTWORK
MODEL P5 (SINGLE) OR P8 (DOUBLE)
INTERIOR BLOWER
7” OR 8” ROUND DUCTWORK
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER
TYPICAL DUCTWORK
HH0212A
IN-LINE BLOWER
10” ROUND DUCT
(
EXCEPT
HLB3, 8’’ ROUND DUCT)
24” TO 36”
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
CAP
HOOD
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER
TYPICAL DUCTWORK
8” ROUND DUCT
HH0215A
24” TO 36”
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
CAP
HOOD
MODEL P3, P6 or iQ6 (SINGLE)
INTERIOR BLOWER
8” ROUND DUCTWORK