Инструкция для Dacor DR30DIHLP

29

Problem Solution Guide - Oven

NOTE: See Common Problems When Using Bake Mode on page 13 for problems with baking.

Problem

May Be Caused By

What to Do

Nothing works.

Range not connected to electrical 

power.

Have an electrician connect range to properly 

wired electrical connection.

Power is off.

Turn power on at circuit breaker panel or fuse 

box. Check for tripped circuit breaker or blown 

fuse. 

Control panel locked.

Press CANCEL

SECURE key for six seconds 

to reactivate control panel.

Power outage.

Contact power company.

Oven will not heat.

Oven setting not correct.

Press CANCEL

SECURE. Follow instructions 

in Operating the Oven section.

Oven set for delay timed cooking.

Oven will turn on automatically at preset time. 

Press CANCEL

SECURE to return to normal 

operation.

Attempting to broil with meat 

probe connected.

Broil and convection broil settings will not 

work when meat probe is connected. Discon-

nect meat probe.

Foods over or under cook.

Incorrect cooking time or tempera-

ture.

Follow instructions in Operating the Oven 

section.

Oven shuts off by itself after it 

has been on for 12 hours.

12 hour timer is on. Unit is set 

to turn off automatically after 12 

hours of continuous use.

Turn off 12 hour timer. See page 13.

Time on display not correct.

Time of day not set.

Set time. See Setting Up Your Range.

Power failure or power was turned 

off.

Reset time. See Setting Up Your Range.

Time flashes on display.

Power failure or power was turned 

off.

Reset time. See Setting Up Your Range.

           continued...

Before You Call for Service

Problem

May Be Caused By

What to Do

Flame is distorted, yellow or 

very large. 

Burner ring or burner cap is dirty 

or clogged.

Clean and dry according to Care and Cleaning 

section.

Burner parts not properly posi-

tioned.

Make sure burner is assembled according to the 

Setting Up Your Range section.

Range set up to use a different 

type of gas (Natural or LP) or set 

up for different altitude.

Have a qualified service technician check to 

make sure that the range is set up for the type 

of gas and the correct altitude.

Gas regulator is not installed or 

faulty.

Have a qualified service technician check the 

gas regulator.

Igniter continues to spark 

(click) after flame ignites.

Burner is cold.

Burners may continue to spark for up to 60 sec-

onds when cold and set to low. See Operating 

the Cooktop section for more information.

Flame distorted by air draft.

Minimize any air drafts around the range. Close 

nearby windows.

Wet or dirty igniter.

Clean and dry according to Care and Cleaning 

section.

Burner ring or burner cap is dirty. Clean and dry according to Care and Cleaning 

section.

Burner parts not properly posi-

tioned.

Make sure burner is assembled according to the 

Setting Up Your Range section.