Инструкции По Установке для Miele DA6296WSS

Cleaning and care

29

 Reinstall the grease filters. When

inserting the filters, make sure that

the locking clip is facing down.

 If the filters have been installed

incorrectly, you can insert a small

screwdriver into the slit to disengage

the locking clip.

Resetting the filter saturation

counter for the grease filters
Once cleaning is complete, the filter

saturation counter must be reset.
 While the fan is turned on, press the

filter saturation indicator  for

approx. 3 seconds until 1 is the only

indicator flashing.

The grease filter symbol  goes out.
When cleaning the grease filters before

the full operating time has elapsed:
 Press the filter saturation indicator



 for approx. 6 seconds until 1 is

the only indicator flashing.

OdorFree Charcoal Filter

If the hood is equipped for recirculation,

an OdorFree Charcoal Filter must be

installed in addition to the grease filters.

This filter is designed to absorb odor-

causing agents and is mounted in the

canopy above the grease filters.
OdorFree Charcoal Filters are available

from your Miele dealer or from Miele.

See "Technical data" for the type and

reference number.

Installing/replacing the OdorFree

Charcoal Filter
 To install or replace the OdorFree

Charcoal Filter, the grease filters must

first be removed as described above.

 Remove the charcoal filter from its

packaging.

 Slide the OdorFree Charcoal Filter

into the back of the intake frame,

then push the front of the filter up into

the frame.

 Reinstall the grease filters.
 When installing the filter for the first

time, activate the filter saturation

counter (see "Operation").