Инструкция для Summit VT65MBISSTB

Plug in the freezer and set the thermostat to the super position (continuous operation).  
(The red and yellow control lights are on.)  When the red light goes off, set the 
thermostat for normal operation.  Wait a couple of hours, then load the freezer. 
 

To freeze larger amounts of unfrozen items (5 pounds or more), turn the thermostat 
knob to super for continuous operation (yellow light is on).  After an hour or so, turn the 
thermostat down to its normal setting (yellow light goes off) and load the freezer.  After 
24 hours, all items should be frozen. 
NOTES:  
1. Keep unfrozen items out of contact with frozen ones. 
2. There is no need to set the thermostat for continuous operation (super) if you only 

intend to freeze smaller quantities of fresh items (2 to 4 pounds). 

 

Frozen items may be stored in the three drawers, or can be placed directly on the 
cooling shelves if one or more of the drawers is removed. 
 

For the most efficient operation and minimum energy consumption, defrost the 
freezer when the frost on the freezer walls reaches 1/8 to 1/4 inch in thickness. 
1. An hour or so before defrosting, set the thermostat to super (yellow light will 

be on) so that the freezer contents are well-frozen.  After that, empty the 
freezer and take care that the items do not begin to thaw. 

2. To start defrosting, unplug the freezer and remove the drawers.  
3. Insert the enclosed tubing into the groove in the bottom of the appliance and 

place a container underneath to collect the defrost water.  Defrosting is 
accelerated if the door is left open. 

4. Use a sponge or toweling to remove water and 

melting ice from the freezer floor. After the frost or 
ice has melted, dry the interior of the freezer 
thoroughly.  

5. Restart the freezer by plugging it in and turning the 

thermostat to the desired position. Once it is cold, 
return the drawers and contents to the freezer. 

CAUTION: Do not use boiling water or an electric device such as a hair dryer to 

help speed up the defrost because this could damage the plastic parts of the 
unit. In addition, never use a sharp or metallic instrument to remove frost as it 
may damage the cooling coils and will void the warranty.  We recommend 
using a plastic scraper. 

 

 

8