Инструкции Пользователя для Miele G6105SCU

Before using for the first time

19

Displaying and setting the water

hardness level
 Turn the dishwasher off with the 

button, if it is turned on.

 Press the Start button and, simulta‐

neously, switch the dishwasher on

using the  button. 

Keep the Start button pressed for at

least four seconds until the Start indi‐

cator light comes on.

If this does not happen, start the proce‐

dure from the beginning again.
 Press the  button twice.
The  indicator light will flash twice at

short intervals.

The value which has been set for the

water hardness appears as a figure in

the time display (see table) according to

.
  will start flashing in the time display.

This is the factory default setting of 1°.
 Use the Start button to select the val‐

ue which equates to your water hard‐

ness level.

Each press of the button moves you

up a level. When the highest water

hardness level is reached, the setting

starts from the beginning again.

The setting is now stored in memory.
 Turn the dishwasher off with the 

button.