Инструкция для Dacor EG366SCH

5

Stack Burners

Put the burner rings on the burner bases as 

1. 

shown below. Match the correct sizes. The 

bottom of the correct size burner ring fits inside 

the top of the matching burner base.
Turn the ring until it drops into place. Twist each 

2. 

ring back and forth slightly to make sure it is 

properly seated.
Put the burner caps on top of the burner rings. 

3. 

The ridge around the bottom edge of the cap 

goes around the top of the burner ring.

Installing the Grates

Gently set the grates on top of the spill tray. Put the 

legs of each grate into the corresponding dimples. 

On model EG366, the middle grate is larger than the 

other two.

Setting Up Your Cooktop

Burner and Grate Assembly

Assemble the burners and grates only when the cooktop 

is cool.

Crown Burners

Put the burner heads in place as shown below. 

1. 

The locating tab on the burner head goes in the 

keyed hole as shown.
Put the burner rings on the burner heads as 

2. 

shown below. Match the tabs on the bottom of 

the ring to the slots on the burner head. Twist 

each ring back and forth slightly to make sure it 

is properly seated.
Put the burner caps on top of the burner rings. 

3. 

The ridge around the bottom edge of the cap 

goes around the top of the burner ring.

Ridge on bottom 

of burner cap

Burner ring

Burner base

Slots

Tabs

Ridge on bottom 

of burner cap

Put locating tab 

into keyed hole

Burner ring

Burner head

Burner base

Keyed hole