Техническая Спецификация для Amana NGD5800DW
2
6. Remove dryer top by sliding top toward rear of dryer and
lift to remove. See Figure 2.
7. Remove console by first removing two (2) screws (one
from each side of console assembly) at location as shown
in Figure 3.
in Figure 3.
9. Remove front panel assembly by opening door and
remove the two (2) screws as shown in Figure 5. After
removal of these screws, close door.
removal of these screws, close door.
10. Disconnect door switch connector. See Figure 6.
FIGURE 2
FIGURE 3
SCREW
CONSOLE
ASSEMBLY
8. Disconnect drum light connector and main console
connector as shown in Figure 4. Lift up on console
and tilt assembly forward to remove console.
NOTE: Only on models with the CCU Bracket located on
the left side of the unit.
and tilt assembly forward to remove console.
NOTE: Only on models with the CCU Bracket located on
the left side of the unit.
FIGURE 6
DOOR
SWITCH
CONNECTOR
11. Remove front panel by first removing four (4) screws from
bottom of front panel as shown in Figure 7.
FIGURE 5
(2) SCREWS
FRONT
PANEL
DRYER DOOR
FIGURE 4
MAIN CONSOLE
CONNECTOR
FIGURE 7
(4) SCREWS
FRONT PANEL
FIGURE 1
(2) SCREWS
TOP - REAR
SECTION 1 - CLOTHES DRYER WITH A FULL-FRONT PANEL
& FRONT MOUNTED CONSOLE
5. Remove dryer top by first removing the two (2) screws
from the rear of the dryer. See Figure 1.
DRUM LIGHT
CONNECTOR
CCU
BRACKET