Инструкции По Установке для Bosch HBE5451UC

Скачать
Страница из 28
5
Before You Begin
Tools and Parts Needed
Philips head screwdriver
1/8" drill bit and drill
Measuring tape
Parts Included
Built-in oven
Power Requirements
The outlet must be properly grounded in accordance with 
all applicable codes.
Preparing the units
Safe use of this appliance can only be guaranteed if it 
has been installed professionally in accordance with 
these installation instructions.  The installer shall be 
liable for damages incurred as a result of incorrect 
installation.
Fitted units must be heat-resistant up to 195°F (90°C), 
and adjacent unit fronts up to 160°F (70°C).
Cut-out work on the units and worktop should be 
performed before fitting the appliances. Remove any 
shavings as they may impair the function of the 
electrical components.
Removing Packaging
NOTICE:  To prevent damage to your floor keep the unit 
in its packaging base until ready to be placed in the 
cabinet opening. Do not slide the unit across the flooring.
Different models use different packaging materials. 
Actual brackets may look differently. Bracket remains in 
packaging base.
1.
Cut straps on outside of box.
2.
Remove cardboard box.
3.
Remove all top and side cardboard and Styrofoam 
braces.
4.
Place oven in front of cabinets where it is to be 
installed.