Техническая Спецификация для Cisco Aironet 1140 AIR-CT12-1140E5
Модели
AIR-CT12-1140E5
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Item
Specification
-83 dBm @ MCS10
-80 dBm @ MCS11
-77 dBm @ MCS12
-73 dBm @ MCS13
-71 dBm @ MCS14
-70 dBm @ MCS15
-80 dBm @ MCS10
-76 dBm @ MCS11
-73 dBm @ MCS12
-69 dBm @ MCS13
-67 dBm @ MCS14
-66 dBm @ MCS15
-86 dBm @ MCS10
-83 dBm @ MCS11
-80 dBm @ MCS12
-75 dBm @ MCS13
-74 dBm @ MCS14
-72 dBm @ MCS15
-76 dBm @ MCS10
-76 dBm @ MCS11
-76 dBm @ MCS12
-71 dBm @ MCS13
-69 dBm @ MCS14
-68 dBm @ MCS15
Maximum Transmit Power
2.4GHz
●
802.11b
◦
20 dBm with 1 antenna
●
802.11g
◦
17 dBm with 1 antenna
●
802.11n (HT20)
◦
20 dBm with 2 antennas
●
802.11n (HT40)
◦
20 dBm with 2 antennas
5GHz
●
802.11a
◦
17 dBm with 1 antenna
●
802.11n non-HT duplicate (802.11a duplicate) mode
◦
17 dBm with 1 antenna
●
802.11n (HT20)
◦
20 dBm with 2 antennas
●
802.11n (HT40)
◦
20 dBm with 2 antennas
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific
details.
details.
Available Transmit Power
Settings
Settings
2.4GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
–1 dBm (0.78 mW)
5GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
–1 dBm (0.78 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific
details.
details.
Integrated Antenna
●
2.4 GHz, Gain 4.0 dBi, horizontal beamwidth 360°
●
5 GHz, Gain 3 dBi, horizontal beamwidth 360°
Interfaces
●
10/100/1000BASE-T autosensing (RJ-45)
●
Management console port (RJ45)
Indicators
●
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors.
Dimensions
(W x L x H)
●
Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm)
Weight
●
2.3 lbs (1.04 kg)
Environmental
●
Nonoperating (storage) temperature: –22 to 185°F (–30 to 85°C)
●
Operating temperature: 32 to 104°F (0 to 40°C)
●
Operating humidity: 10 to 90% percent (non-condensing)
System Memory
●
128 MB DRAM
●
32 MB flash
Input Power Requirements
●
AP1140: 44 to 57 VDC
●
Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Powering Options
●
802.3af Ethernet Switch
●
Cisco AP1140 Power Injectors (AIR-PWRINJ4=)
●
Cisco AP1140 Local Power Supply (AIR-PWR-A=)
Power Draw
●
AP1140: 12.95 W
Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount
dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the
total system power draw (access point + cabling) to 15.4W.
dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the
total system power draw (access point + cabling) to 15.4W.
Warranty
Limited Lifetime Hardware Warranty