Инструкции Для Сборки для Hansgrohe 18115001

3

Remove the caps from the plaster shields on the rough 

valve (1).  
Cut the plaster shields so that they extend 1/16” outside 

the surface of the finished wall (2).  

Remove the plug from the spout outlet using a 17 mm 

socket wrench (1).
Install the valve slip coupling on one of the the valves (2).  
Mark a point on the slip coupling 3/16” from the surface 

of the finished wall.  Cut the slip coupling at that point 

(3).  

Install the spindle extension (1).  
Mark a point on the spindle extension 9/16” from the 

surface of the finished wall.  Cut the spindle extension at 

that point (2).

2

1

3