Инструкции Пользователя для Gaggenau DF251761

en-us    Rinse Aid

Undo the screw plug on the dispenser 1R.

Fill the dispenser with water (required only when 
switching on the appliance for the first time). 

Add salt as illustrated (do not use table salt or tablets). 

The water is displaced and runs out. 

For more information about buying dishwasher salt, 
please contact customer service (1-800-944-2904).

If combined detergents with a salt component are used, 
special salt can usually be omitted up to a water 
hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l). If 
the water hardness is over 21° dH, salt must be used.

If the use of combined detergents with a salt component 
impairs the low salt indicator P on the control panel 
or the text on the display window at the top @ (enough 
salt for x rinse cycles), the displays can be switched off.

Proceed as described under “Setting water softening 
system” and set the value to 0-8. The water softening 
system and salt refill indicator are now switched off.

,

Rinse Aid

As soon as the low rinse aid indicator H lights up on 
the control panel, rinse aid should be topped off. 
The  rinse aid is  required for  stain-free utensils and  clear 
glasses. Use only rinse aid which the manufacturer 
designates as save to use in domestic dishwashers. 
Combined detergents with rinse aid component may be 
used up to a water hardness of 21° dH (37° fH, 26° 
Clarke, 3.7 mmol/l) only. If the water hardness is over 
21° dH, rinse-aid must be used.

NOTICE: To avoid oversudsing or clogging, do not 
overfill the rinse aid dispenser 9". Wipe up any spills 
with a damp cloth.

Open the rinse aid dispenser 9" by pressing on the 
latch of the lid and pulling it open.

Add liquid rinse aid to the dispenser 9" until it is 
full. Do not overfill.







PD[