Инструкции По Установке для Whirlpool WFC340S0AB

Use this method for:

■

New branch-circuit installations (1996 NEC)

■

Mobile homes 

■

Recreational vehicles

■

In an area where local codes prohibit grounding through the 
neutral

1. Part of metal ground strap must be cut out and removed.

2. Use a Phillips screwdriver to remove the ground-link screw 

from the back of the range. Save the ground-link screw and 
the end of the ground link under the screw.

3. Pull the wires through the strain relief on bottom of range. 

Allow enough slack to easily attach wiring to the terminal 
block.

4. Attach terminal lugs to line 1 (black), neutral (white), and line 2 

(red) wires. Loosen (do not remove) the setscrew on the front 
of the terminal lug and insert exposed wire end through 
bottom of terminal lugs. Securely tighten setscrew to torque 
as shown in the following Bare Wire Torque Specifications 
chart.

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

5. Use a hex or Phillips screwdriver to connect the bare (green) 

ground wire to the range with the ground-link screw and 
ground-link section. The ground wire must be attached first 
and must not contact any other terminal.

6. Use 

³⁄₈" nut driver to connect the neutral (white) wire to the 

center terminal block post with one of the 10–32 hex nuts.

7. Connect line 2 (red) and line 1 (black) wires to the outer 

terminal block posts with 10-32 hex nuts.

8. Securely tighten hex nuts.

9. Replace terminal block access cover.

A

B

C

A

B

C

D

E

G

F

8 gauge copper

25 lbs-in. (2.8 N-m)

6 gauge aluminum

35 lbs-in. (4.0 N-m)

A

B

C

D

E

B

A

G

E

C

D

F