Краткое Руководство По Установке для Fisher & Paykel DD24DAX8
590663A 08.14
doS ANd doN’tS oF loAdiNg
preFereNCe optioNS
For more iNFormAtioN
dUriNg ANd AFter the wASh
As the wash progresses, the display will count down the minutes remaining and show what stage the program is at.
When the program has finished, the display will show
When the program has finished, the display will show
0
and the dishwasher will beep.
After 30 seconds the display will go out.
You may notice the following noises at the end of the wash. These are all part of normal operation:
●
●
Both drawers may be draining simultaneously.
●
●
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened.
The fan assists with drying and uses negligible amounts of energy.
The fan assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
A neatly arranged load with evenly
spaced dishes helps wash performance.
spaced dishes helps wash performance.
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Overcrowding reduces wash
performance.
performance.
Protruding items will stop the
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
they are less likely to be cleaned
well.
Ensure that water reaches all items on
the racks.
the racks.
Dishware is blocking water from
reaching items on the racks.
reaching items on the racks.
Scrape food off
Remove all food scraps off the dishes.
Load dishes carefully
Ensure no items protrude out of the drawer.
Check spray arm(s)
Ensure no item blocks the
spray arm(s) from rotating freely.
Check detergent and rinse aid
Fill the detergent dispenser (
1
) with powdered
detergent and close the dispenser door.
Do not place liquid detergent or tablets
in the dispenser.
Ensure there is enough rinse aid in the rinse
aid dispenser (
2
).
Select programme
We highly recommend using the Normal
programme for everyday dishes to obtain
the best wash and dry performance.
Heavy
Normal
Fast
Delicate
Rinse
2
1
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
settings before you start using your dishwasher.
optioN
riNSe Aid
opeN drAwer
AUto power-oN
tUrN BeepS oFF
CloSed drAwer AUtoloCk
What
does
it do?
Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam after
a wash. Increase this
setting if dishes are wet
or streaky after a wash.
of rinse aid dispensed.
Reduce this setting if
there is excess foam after
a wash. Increase this
setting if dishes are wet
or streaky after a wash.
Your dishwasher
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
This turns all beeps off
except for fault alerts.
except for fault alerts.
When this setting is on,
the drawer will automatically
lock 30 seconds after it’s closed.
It can then be unlocked by
pressing
the drawer will automatically
lock 30 seconds after it’s closed.
It can then be unlocked by
pressing
(unless Keylock
or Childlock is also activated).
Useful in boats or motor homes.
Useful in boats or motor homes.
how to change the setting of an option
1
CHECK
Check that there is no wash underway, press
2
ENTER MENU & SCROLL TO OPTION
To enter the menu: Press and hold the
and
together for 5 seconds.
●
●
You are now in the Rinse aid option of the preference options menu.
●
●
If you want to change the Rinse aid setting, go to step 3 now.
●
●
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
. To know which option you’re in, watch the letters in the display (see table below).
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
3
CHANGE SETTING
Press
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press
3 times.
4
SAVE SETTING & QUIT MENU
Press
. This will save the new setting and quit the preference options menu.
For detailed information on the
features of your dishwasher
features of your dishwasher
For warranty information
If you…
●
●
have any questions or comments
●
●
need a Fisher & Paykel authorized
technician to service your product
technician to service your product
●
●
need replacement parts or accessories
●
●
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
NZ
toll-free, 24/7
0800 372 273
AU
toll-free, 24/7 1300 650 590
USA
toll-free, 24/7 1 888 936 7872
CA
toll-free, 24/7 1 888 936 7872
www.fisherpaykel.com
optioN
riNSe Aid
opeN drAwer
AUto power-oN
BeepS At eNd
oF wASh
CloSed drAwer
AUtoloCk
Which option
am I in?
Possible
settings
Off to Max (rA5)
On or Off
On or Off
On or Off
Example
setting is 1
setting is 4
On
Off
On
Off
On
Off