Техническая Спецификация для Fujitsu Primergy RX300 S5 VFY:R3005SP030ES

 Fujitsu PRiMERGY RX300 s5 Dual-sockEt 2u Rack sERvER 

Page 4 / 9

4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600

6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600

10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)

2 x vGa (thereof 1x front optional)

1 x serial RS-232-C,  usable for iRMC or system or shared

1 x serial Rs-232-c

2  x Gbit/s Ethernet

1 x dedicated service lan port for iRMc s2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port

Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot, if at least 1 HDD is configured).
see under components RaiD controller

ICH10B, with two SATA channels for DVD + backup

intel

®

 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), VT-c (I/O acceleration and VMDq), PXE boot via LAN 

from PXE server, iSCSI boot (also diskless) via onboard LAN

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Infineon / separate module; TCG V1.2 compliant (option)

5 x low profile 

2 x low profile , both are notched x8 slot as well for x16 cards

Two of four PCI-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.
One PCIe Gen2 x4 slot may be occupied with a modular RAID controller if configured.

1 x 5.25/0.5-inch for CD-RW/DVD
1 x 3.5/0.5-inch for serverview local service Panel  or local service Display 
1 x 3.5/1.6-inch for backup devices (occupies 2x 3.5-inch hDD for basic unit 6x 3.5-inch)

All possible options described in relevant system configurator.

12 x 2.5-inch hot-plug sas/sata

6 x 3.5-inch hot-plug sas/sata

8 x 2.5-inch hot-plug SAS/SATA

5

redundant hot plug fans  (5+5 redundancy)

on/off switch
nMi button
Reset button