Инструкция С Настройками для Sony LBT-GPX555

model name [LBT-GPX555 / MHC-GPX888/GPX555]

[4-485-746-11(1)] GB

filename[D:\NORM'S JOB\SONY HA\SO130059\LBT-
GPX555\4485746111_GB\06BAS.fm]

masterpage:Left

“BLUETOOTH” appears in the 
display panel.

If the system is connected to a Bluetooth 
device, press BLUETOOTH to disconnect 
the Bluetooth device.

“PAIRING” flashes in the display 
panel.

For details, refer to the operating 
instructions of your Bluetooth device.

For example, select 
“SONY:MHC-GPX888” (or 
LBT-GPX555/MHC-GPX555). 
If passkey is required on the Bluetooth 
device, enter “0000”.

When pairing is completed and the 
Bluetooth connection is established, 
Bluetooth device name appears in the 
display panel.
Depending on the Bluetooth device, 
connection may start automatically 
after pairing is completed.
You can check the Bluetooth device 
address by pressing DISPLAY 
repeatedly.

• You can pair up to 9 Bluetooth devices. If the 

10th Bluetooth device is paired, the oldest 
paired device will be deleted.

• “Passkey” may be called “Passcode”, “PIN 

code”, “PIN number” or “Password”, etc., 
depending on the device.

• The pairing standby status of the system is 

canceled after about 5 minutes. If pairing is 
not successful, repeat from step 1.

• While connected to a Bluetooth device, this 

system cannot be detected and connection 
cannot be established from another Bluetooth 
device which is never paired before.

• If you want to pair with another Bluetooth 

device, repeat steps 1 to 6.

Hold down BLUETOOTH on the unit for 
2 seconds or more until “BLUETOOTH” 
appears in the display panel.

You can operate a Bluetooth device by 
connecting the system and the Bluetooth 
device using AVRCP.
Check the following before playing 
music:
– The Bluetooth function of the Bluetooth 

device is turned on.

– Pairing has been completed.

“BLUETOOTH” appears in the 
display panel.

The last connected Bluetooth device 
will be connected automatically.
Perform the Bluetooth connection 
from the Bluetooth device if the device 
is not connected.
Once the connection is established, the 
Bluetooth device name appears in the 
display panel.

Press N to start playback.

Depending on the Bluetooth device, 
– you may need to press N twice.
– you may need to start playing an 

audio source on the Bluetooth 
device.