Инструкции Пользователя для Samsung NP270E5G-K02J

Activate the system remotely from sleep mode when a signal, 

such as a ping or magic packet command, is received via a wired 

LAN.

  On the desktop, open the Charms and select the Settings 

charm > Control Panel > Network and Internet > Network 

and Sharing Center > Change adapter settings.

  Right-click Ethernet and select Properties.

  Select Configure… > Power Management > Allow this 

device to wake the computer > OK.

  Restart the computer.

•

  

If the computer wakes up from sleep mode inadvertently, 
disable the Wake on LAN feature.

•  This feature may not work while using other power saving 

features. To disable other sleep functions, select the Settings 
charm 

 Control Panel 

 Hardware and Sound and then set 

Power Options.

When connected to a 100Mbps/1Gbps wired LAN , a 

• 

message appears informing the user of connection to 

a 10Mbps/100Mbps wired LAN when the computer 

wakes from sleep mode. This happens because restoring 

the network takes about 3 seconds. When the network 

is restored, the computer will be connected to the 

100Mbps/1Gbps LAN.
When the system is running on battery power, it may take 

• 

a few seconds for the connection to be established when 

connecting a LAN cable. This is the result of power saving 

features designed to reduce battery consumption.
When the system is running on battery power, the speed of 

• 

a wired LAN is decreased automatically to reduce battery 

consumption. In this case, a 1Gbps/100Mbps LAN would 

function at the speed of a 100Mbps/10Mbps connection.