Инструкции Пользователя для Samsung WAM350/ZA

❚

Adding another M3 and Hub to a single M3 in use

When the M3 in use is connected to the router with a LAn cable

Disconnect the LAN cable from the M3 in use.

Connect the HUB to the wireless router with the LAN cable, and then plug in the

HUB's power cable.

Plug in the power cable of the new M3. The new M3's blue LED pairing indicator starts

to flash. Wait until the pairing indicator on the M3 stops flashing. When the indicator

stops flashing, pairing is complete. The M3 may also beep.

Turn off the old M3 by disconnecting the power cable. Then, connect it again.

Press the

spK Add

button on the back of the M3. The M3's blue LED pairing

indicator starts to flash. Wait until the pairing indicator on the M3 stops flashing. When

the indicator stops flashing, pairing is complete. The M3 may also beep.

On your smart device, select the samsung Multiroom app. Setup starts.

4444