Справочник Пользователя для Whirlpool WFW9351YW

Your new front-loading high efficiency washer, was designed to 
conserve resources and lower your water and energy bills. The 
washer is designed to determine and then provide the amount of 
water needed for the best performance. The time of operation 
may be greater for this new system than for a conventional 
washer.

Flexible electronic controls are easy to use whether you are a 
beginner or an expert.

Adjusting to the size of the load, this feature allows the washer to 
use the minimal amount of water needed to clean and rinse the 
clothes. With a low water level, you can obtain the same results. 
Because only the required amount of water is used, the washer 
saves energy, too. You can obtain the same washing results for 
small and large load sizes.

Since there is no agitator, you can wash larger, bulkier items such 
as an average size sleeping bag. You are also able to wash more 
clothes at one time, which means fewer loads. You can wash a 
pillow or a large stuffed teddy bear.

To reduce washer “walk” and “off-balance” conditions, your new 
washer combines:

■

2 Springs to isolate vibration

■

3 Shock absorbers at the washer base to minimize movement

The stainless steel drum eliminates corrosion and enables higher 
spin speeds for more water extraction, reducing drying time.

The motor adapts to the load size and to the cycle selected to 
give the optimum cleaning, rinsing, and spinning conditions. The 
motor can handle slow speeds needed for delicate items and is 
powerful enough to drive an average clothes load up to high-
speed spin.

This washer automatically selects the spin speed based on the 
cycle selected. For some cycles, the default spin speed can be 
changed if desired. This washer offers up to three different spin 
speed choices.

This washer has a heating element that automatically heats the 
water to the best temperature on Whitest Whites, Eco Whitest 
Whitest, Eco Heavy Duty, Heavy Duty, and Bulky cycles. This 
enables stepped cleaning, a process in which warm water is 
brought in and mixed with detergent first, then the water is 
heated. 

This option is available in all wash cycles except Rinse/Drain & 
Spin, and Clean Washer with AFFRESH™ cycle. When this option 
is available at the beginning of the cycle, the Add a Garment 
status light will illuminate for the first 7 minutes. This washer 
allows a 7-minute period in which other garments may be added 
to a load.

A precision balancing system allows the washer to reach high-
speed spins. The washer spins faster so that clothes coming out 
of the washer will have less moisture than with traditional top load 
machines. In addition, if the Dynamic Balance system detects off-
balance loads during spinning, it redistributes the clothes so that 
they are evenly balanced.

The three compartments in the dispenser allow loading of all 
laundry products before the washer is started. The products will 
be dispensed into the wash at the optimal time for high-
performance cleaning. The bleach release system is included in 
the detergent advantage system. The detergent is added at the 
beginning of the cycle, and the bleach is added after the enzymes 
have had a chance to do their cleaning. The fabric softener is 
dispensed in the rinse cycle or in the Extra Rinse, if selected. The 
Detergent Advantage System Dispenser tray is easily removed for 
cleaning.