Краткий Справочник для Yamaha YSP-2500
This Quick Reference Guide provides instructions for connecting a TV and BD/DVD player to this device, applying settings, and playing
content. For more information on operations, refer to the “Owner’s Manual” in the supplied CD-ROM.
Read the supplied booklet “Safety Brochure” before using this unit. For instructions on how to operate or set the external devices,
refer to the owner’s manual supplied with each devices.
content. For more information on operations, refer to the “Owner’s Manual” in the supplied CD-ROM.
Read the supplied booklet “Safety Brochure” before using this unit. For instructions on how to operate or set the external devices,
refer to the owner’s manual supplied with each devices.
■
Preparing remote control
Installing the batteries
Operation range
Quick Reference Guide
English
UCABGLHV
Supplied accessories
Before connecting, make sure you have received all of the following items.
Supplied accessories for the optional Wall Mount Bracket SPM-K20
See page 19 in the Owner’s Manual.
Devices and cables required for connection
Center unit (YSP-CU2500)
Wireless subwoofer (NS-WSW120)
Remote control
Batteries
(AAA, R03, UM-4) (x2)
Optical cable
(1.5 m (4.9 ft))
IntelliBeam microphone
(6 m (19.7 ft))
Cardboard
microphone stand
Non-skid pads (8 pcs)
Owner’s Manual
CD-ROM
Quick Reference Guide (this booklet)
Safety Brochure
Spacers (x2)
Pads (x3)
Screws (M4, 22 mm) (x2)
Mounting template
• TV
• BD/DVD player
• HDMI cables (x2)
STATUS
INTELLIBEAM MIC
PHONES
Battery × 2 (supplied)
(AAA, R03, UM-4)
(AAA, R03, UM-4)
Press down on the
arrow and slide the
cover in the direction
in which it points.
arrow and slide the
cover in the direction
in which it points.
Slide the cover back to close it.
STATUS
Within 6 m (20 ft)
Installation
Connection
Settings
Playback
Installation
Center unit
Subwoofer
This unit creates surround effects by reflecting sound beams off the walls of
your listening room. The arrows in the diagrams below indicate the images of
paths of 5-channel sound beams. To achieve desired surround sound effects,
install this unit where there are no objects such as furniture obstructing the
path of sound beams.
your listening room. The arrows in the diagrams below indicate the images of
paths of 5-channel sound beams. To achieve desired surround sound effects,
install this unit where there are no objects such as furniture obstructing the
path of sound beams.
Parallel installation
Corner installation
Objects,
such as
furniture
such as
furniture
Objects, such as furniture
40° to 50°
1
Front left channel
2
Center channel
3
Front right channel
4
Surround left channel
5
Surround right channel
* Use the TV Remote Repeater function if
the center unit obstructs the remote
control sensor on the TV. See “Enabling
TV Remote Repeater function”.
control sensor on the TV. See “Enabling
TV Remote Repeater function”.
• Install the center unit in the center of the left
and right walls.
• Place the center unit on a TV stand in front of
the TV*.
• This unit can be mounted on a wall using the
optional Wall Mount Bracket SPM-K20. See
page 19 in the Owner’s Manual.
page 19 in the Owner’s Manual.
• To prevent sound reflecting
off of walls, angle the
subwoofer slightly toward the
center of the room.
subwoofer slightly toward the
center of the room.
• When installing the
subwoofer on a rack, be sure
the rack is strong enough to
support the subwoofer and
that it leaves sufficient space
for heat discharge.
the rack is strong enough to
support the subwoofer and
that it leaves sufficient space
for heat discharge.
• The subwoofer can also be
placed on its side. See page
18 in the Owner’s Manual.
18 in the Owner’s Manual.
• The listening position (such as sofa, etc.)
should be located at the front of the
center unit.
center unit.
• The distance between the listening
position and the center unit should be
more than 1.8 m (6 ft).
more than 1.8 m (6 ft).
■
Adjusting the height of the center unit
Turn the legs counter-clockwise to increase the height of the
center unit if necessary. Use the arrows (
center unit if necessary. Use the arrows (
U
) on the bottom of the
left and right legs, and the scale on the insides of these legs, to
confirm that the legs are positioned at the same height.
confirm that the legs are positioned at the same height.
Scale
Adjustable range:
22 to 35 mm
(7/8 to 1-3/8 in)
22 to 35 mm
(7/8 to 1-3/8 in)
■
Removing the legs
If the center unit obstructs the remote control sensor on the TV or signal transmitter for 3D glasses, remove the legs to decrease the
height of the center unit.
The legs consist of components (inner legs) that are fixed to the center unit with screws, and components (outer legs) that can be
removed by rotating them.
height of the center unit.
The legs consist of components (inner legs) that are fixed to the center unit with screws, and components (outer legs) that can be
removed by rotating them.
1.
Remove the outer legs.
Keep turning the outer legs counter-clockwise to remove
them.
them.
2.
Remove the inner legs.
Use a screwdriver to remove the screws.
3.
Attach the one of the four supplied non-skid pads at each
of the four corners on the bottom of the center unit.
of the four corners on the bottom of the center unit.
An example of pad positioning is shown in the illustration below.
Store the legs and screws in a safe place out of the reach of children for later use and to prevent children from accidentally swallowing
screws.
screws.
Note
Installation
Connection
Settings
Playback
Connection
■
Connecting a TV and BD/DVD player
For the cable connection, follow the procedure below. See page 26 in the Owner’s Manual when connecting other playback devices such as a game console.
• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.
SYSTEM
CONNECTOR
R
L
AUX1
AUX2
TV
OPTICAL
OUT (ARC)
IN1
IN2
HDMI
IN3
SUBWOOFER
OUT
SYSTEM
CONNECTOR
R
L
AUX1
AUX2
TV
OPTICAL
OUT (ARC)
IN1
IN2
HDMI
IN3
SUBWOOFER
OUT
HDMI INPUT
OPTICAL
OUTPUT
OUTPUT
1
2
3
HDMI
OUTPUT
BD/DVD player
TV
1. Remove the cap
2. Check the direction of
the plug
Video signals
Audio signals
1
2
3
To an AC wall
outlet
outlet
1.
HDMI cable (optional)
Input the digital audio/video signals from the BD/DVD player to this unit.
2.
HDMI cable (optional)
Digital video from the BD/DVD player is displayed on the TV.
3.
To an AC wall outlet
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack
with “ARC” indicated) on TV.
• Activate the HDMI control function of this unit so as to activate the Audio Return
Channel (ARC). See page 59 in the Owner’s Manual.
What is Audio Return Channel (ARC)?
A function transmits digital audio signal output from TV to this unit through an
HDMI cable. By this function, an optical cable to connect TV and this unit is not
needed.
HDMI cable. By this function, an optical cable to connect TV and this unit is not
needed.
y
Tips
Use an optical cable when
connecting a TV that does not
support Audio Return Channel.
connecting a TV that does not
support Audio Return Channel.
■
Turning on the unit
Plug the power cable of the supplied subwoofer into an AC wall outlet. When
the center unit is turned on, the center unit and subwoofer are automatically
connected via a wireless connection.
the center unit is turned on, the center unit and subwoofer are automatically
connected via a wireless connection.
入力
システム接続
SWペアリング
STATUS
INTELLIBEAM MIC
PHONES
To an AC wall outlet
1.
Plug the subwoofer’s
power cable into an AC
wall outlet.
power cable into an AC
wall outlet.
2.
Press the
z
key.
TX indicator
Glows
Connection indicator
Glows green
■
Enabling TV Remote Repeater function
When the TV Remote Repeater function is enabled, the unit receives TV remote control signals at the TV remote control
sensor (on front) and transmits the signals from the TV Remote Repeater (on rear). This function is useful when you
cannot operate your TV from the remote control because the remote control sensor of the TV is blocked by the unit.
This function can be used while the TV remote control is using infrared signals.
sensor (on front) and transmits the signals from the TV Remote Repeater (on rear). This function is useful when you
cannot operate your TV from the remote control because the remote control sensor of the TV is blocked by the unit.
This function can be used while the TV remote control is using infrared signals.
SYSTEM
CONNECTOR
R
L
AUX1
AUX2
TV
OPTICAL
OUT (ARC)
IN1
IN2
HDMI
IN3
SUBWOOFER
OUT
TV remote control sensor
1.
Hold down the REPEATER key on the supplied remote control for more than 3 seconds.
TV remote control
TV Remote Repeater
Glows
© 2014 Yamaha Corporation
Printed in Indonesia ZM27580 [En]
En