Инструкции Пользователя для Whirlpool XHPC155XL

 Tip the washer/dryer back to its upright position. Remove  

any remaining packaging material. Set the pedestal box aside 

for use when installing the pedestal on the dryer. Once both the 

washer and dryer have been installed, dispose of/recycle all 

packaging material.

Follow the installation instructions that came with your washer/

dryer to finish installing or reinstalling your washer/dryer (i.e., 

hoses, vents, etc.). Be sure to remove the shipping bolts from the 

back of the washer, if not previously removed.

The pedestal arrives with the feet tight against the bottom of the 

pedestal. Using a 1/4" hex head ratchet or open-end wrench, 

lower the feet approximately 1" (25 mm) away from the bottom  

of the pedestal.

Align the sides of the pedestal so that they are even with the 

sides of the washer/dryer. Reach inside the pedestal opening  

and securely tighten all four pedestal screws.

 Position the pedestal toward the front of the dryer and install  

the two remaining hex-head sheet metal screws. Do not tighten  

completely. Now proceed to "Complete the pedestal installation".

Washer shown