Справочник Пользователя для Samsung mxjs5000/za

Functions

Listening to the Radio

To Store the Stations You Want

You can store up to 15 FM stations

15 AM stations.

Select

FM or AM by pressing the TUNER

button.

To search for a station, press the

TUNING

MODE button on the remote control or the

STOP button on the product one or more times

until

MANUAL is displayed.

3. Select a station by:

• Pressing and holding the

TUNING 1,

button on the remote control to

automatically search for active broadcasting

stations.

4. Press the MO/ST button to switch between

stereo and mono.
• In a poor reception area, select

MONO for

a clear, interference-free broadcast.

• This applies only when listening to an FM

station.

5. If you do not want to store the radio station

found, go back to Step 3 and search for

another station.
Otherwise:
a. Press the MEMORY button.

• FM followed by a flashing number appears in

the display. That number is the current preset

number.

b. Press the 1, 2 button or the ,, .

buttons to scroll through and select a

preset number.

c. Press the ¬ button to save the preset.

• You can select a number from 1 to 15.

6. To store additional radio stations, repeat Steps

3 to 5.

|NOTES |

✎

In Tuner mode

- In the Manual mode, you can use the 1 or

button to change stations.

- In the Preset mode, you can use the 1

or 2 button to search for a stored radio

station.

Selecting a Stored Station

To listen to a stored station, follow these steps:
1. Select FM or AM by pressing the TUNER

button on the product or remote control.

2. Press the TUNING MODE button on the

remote control until “

PRESET” is displayed.

3. Press 1, 2 button on the main unit or

TUNING 1, 2 on the remote control to

select a preset number.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the

required options. If you exceed this time, you must

start again.
1. Press the TIMER SET button on the remote

control twice. "

CLOCK " is displayed.

2. Press the ¬ button on the remote control.

The hour flashes.
• T

o increase the hours: ,

• To decrease the hours: .

3. When the correct hour is displayed, press the

button, and then the minutes flash.

• To increase the minutes: ,
• To decrease the minutes: .

4. When the correct minute is displayed, press

the ¬ button, and then "

TIME" appears in

the display.

Setting the Timer

The timer enables you to set the product to switch

on or off at specific times automatically.
• Before setting the timer, confirm that the current

time is correct.

• For each step, you have a few seconds to set

the required options. If you exceed this time,

you must start again.

• If you no longer want the product to be

switched on or off automatically, you cancel the

timer by pressing the

TIMER ON/OFF button.

English

02793J-MX-JS5000-ZP-ENG-20150205.indd 22

2015/3/20 11:23:30