Справочник Пользователя для Gigaset SL100 RC-11065

Модели

RC-11065

Registering and de-registering handsets

Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / registration.fm / 28.10.05

Registering and de-registering handsets

You can register up to six handsets on your base station.
An SL1 colour handset can be registered on up to four base stations.

Manual registration:

Gigaset SL1 colour to Gigaset SL100 colour

You have to initiate handset registration on the handset and on the base station.

1. On the handset

Register H/Set

Base 1

flashes in the display when the system PIN has been entered.

2. On the base station

The base station search is cancelled after 60 seconds. If registration has not completed

inside this time, repeat the process.
After successful registration, the handset will be assigned the lowest free number.

Manual registration:

Gigaset 1000 to 4000 and other handsets with GAP functionality

This section describes how to connect handsets belonging to the Gigaset families, hand-

sets A 2, C 1, S 1 or handsets of other devices with GAP functionality to your Gigaset

SL100 colour.

1. On the handset

Start to register the handset as described in its operating instructions.

2. On the base station

The next unassigned internal number (1-6) is automatically assigned to the handset as

it is registered. If all the numbers have been assigned, number 6 is overwritten provided

the handset is in idle status.

Base 1

Select base station (1–4) and confirm, e.g. Base 1.

Enter the system PIN (the factory setting: 0000) and

confirm.

Press the registration/paging key on the base station

for 3 seconds. Registration is initiated.

Press the registration/paging key on the base station

for 3 seconds. Registration is initiated.