Инструкции Пользователя для HP DJ3631

The Wireless light is blinking, and the Wireless icon and

Wireless Attention icon are on.

There is no wireless signal.

●

Make sure your wireless router or access point is

powered on.

●

Move the printer closer to the wireless router.

The Wireless light is blinking, the Wireless icon is on, and the

Wireless Attention icon is blinking.

One of the following might have occurred.

●

The printer has a problem connecting to the wireless

network.

●

An error occurs or an overlap session is detected when

using WPS.

Press the Wireless button (

) and the Information

button (

) together to run the wireless test, and then

review the test report for information on how to solve the

problem.

●

The Wi-Fi Direct light and icon are on.

Wi-Fi Direct is turned on and ready to use.

To learn how to connect to your printer using Wi-Fi Direct, see

.

The Wi-Fi Direct light and icon are off.

Wi-Fi Direct is off.

To turn on Wi-Fi Direct, press the Wi-Fi Direct button (

).

The Wi-Fi Direct light is blinking.

The printer is connecting to a mobile device in the Wi-Fi

Protected Setup (WPS) push mode. Press the Wi-Fi Direct
button (

) to finish connecting.

The Wi-Fi Direct light blinks fast for three seconds, and then

stays on.

The printer already has the maximum number of Wi-Fi Direct

connection and another device is trying to connect to the

printer with Wi-Fi Direct.

The Wi-Fi Direct light blinks fast for three seconds, and then

turns off.

Wi-Fi Direct is disabled. For more information, contact the

person who set up the printer.

●

8

Chapter 2   Get started

ENWW