Инструкции Пользователя для Electrolux EIDW5705PS

•

Soiled dishes left in dishwasher too long can
create an odor. Use Rinse cycle.

•

There will be a “new” smell when first
installed. This is normal.

•

Check to see if food particles are in glass
trap. (See Care of Glass Trap Filter, page 15).

•

Check to see if unit is draining properly (See
Dishwasher Does Not Drain Properly, page
19).

1 Load clean dishes and glasses in normal

manner. Do not load any metal utensils or
silverware.

2 Do not add detergent.

3 Select the HEAVY WASH cycle. Press START/

CANCEL pad and close door.

4 Allow 1/2 hour for the dishwasher to begin the

main wash. Open door and pour 2 cups of
white vinegar into the bottom of the
dishwasher.

5 Close and latch door and allow cycle to

finish.

In certain situations which are critical to machine
function and safe operation, the control will shut
down.  All lights on console will illuminate.

Er 01

Leak Detector - Water detected in the pan under
the tub.

Er 02

Thermistor - Failed thermistor/turbidity module.

Er 03

Wash Pump - Wash pump not operating

Er 06

Lower Fan - The control board did not receive
proper speed feedback from the lower fan

Er 08

Tactile or touch switch - Control board has
verified a switch on the user interface is bad or
shorted

Er 09

Communications - Communication failure be-
tween main user board and power supply

Er 10

Mains Relay - Failure in the mains power relay

Er 13

System wide - Lost control of the State Machine

Hard water can cause lime deposit buildup on the
interior of the dishwasher. Dishes and glasses may
also get spots and film for a number of reasons
(See Glassware/Flatware Spotted or Cloudy, page
18).

Er 15

Fill Valve - Water inlet valve is leaking

Er 16

Float - Float switch is stuck/drain is clogged.