Справочник Пользователя для Summit 30" Built-In Two-Drawer Refrigerator - Black Cabinet with Stainless Steel Drawers

Major Adjustment:

Note: The slides have extra mounting holes that may be used.

1. Remove one slide’s mounting screws.

2. Reposition the slide so it is the same distance from the bottom of the liner as the other slide. Measure

to confirm.

3. Mark new drilling holes using different sets of mounting holes on the slide.

Note: Front location holes are shown. Corresponding rear holes will also need to be marked.

4. Drill all the new holes with a #30 drill bit.

5. Remount the slide.

RE-INSTALLAT ION OF DRAWER

Caution:

Use care when handling the drawer. Drawer edges, drawer rail and the unit’s slide may
be sharp.

1. Set the drawer ’s rails onto the slides.

2. Re-install the rails’ mounting screws.

3. Plug in the drawer ’s connection wiring