Инструкции Пользователя для Electrolux E36GF76HPS
12
Figure 1
Figure 2
Burner
Cap
Burner
Head
Burner
Cap
Burner
Head
Gas
Opening
electrode
Surface Cooking
PlaceMent of buRneR GRates
Place grates on the Ceramic Glass Cooktop. Be sure they are right located
inside the stainless steel frame.
ATTENTION: Do not slide the grates on the stainless steel frame, doing so
can damage the surface.
PlaceMent of buRneR heads and caPs
For the 18 000 BTU burner:
Place the burner head over the gas orifice
(Figure 1).
Be careful not to damage the
electrode while placing the burner head over
the orifice. Make sure electrode fits correctly
into slot in burner head.
For all burners:
Place a burner cap on each burner head (see
Figure 2), matching the cap size to the head
size. The cap for each burner has an inner
locating ring which centers the cap correctly on
the burner head. Be sure that all the burner caps
and burner heads are correctly placed BEFORE
using your appliance.
Make sure each burner cap is properly aligned
and level.
Turn the burner on to determine if it will light.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.