Инструкции Пользователя для Electrolux E36GC76PPS

Скачать
Страница из 18
16
Solutions to common problems
Before you call for service, review the following list. It may save you time & expense. The list includes 
common occurrences that are not the result of defective workmanship or materials in this appliance. 
Questions or for service call:  1-877-4ELECTR
OLUX
 (1-877-435-3287)
Before you call
Problem 
Solution
Surface burners 
do not light.
•  Surface control knob has not been completely turned to
position. Turn the 
Surface Control knob to 
and push in and  until burner ignites and then turn 
control knob to desired flame size.
•  Be sure gas supply valve is open.
•  Burner ports are clogged. Clean burner. See Cleaning the burner grates, burner
caps, burner heads in general care & Cleaning section. With the burner off, 
clean ports with a small-gauge wire or needle.
•  Power cord is disconnected from outlet (Electric ignition models only). Be sure
cord is securely plugged into the outlet.
•  Electrical power outage (electric ignition models only). Burners can be lit
manually. See Setting Surface Controls in this Use and Care Guide.
Burner flame only
lights half way 
around burner
•  Burner ports are clogged. With the burner off, clean ports by using a small-
gauge wire and needle.
•  Moisture is present after cleaning. Lightly fan the flame and allow burner to operate
until flame is full. Dry the burners thoroughly following instructions in the General
Cleaning section.
Burner flame is
orange
•  Dust particles in main line. Allow the burner to operate a few minutes until flame
turns blue.
•  In coastal areas, a slightly orange flame is unavoidable due to salt air.
Scratches or 
abrasion on 
ceramic glass 
cooktop surface
•  Coarse particles (such as salt or sand) are between cooktop and utensil.
Be sure cooktop surface and bottom of utensils are clean before use. Small
scratches do not affect cooking and will become less visible with use.
•  Cleaning materials not recommended for glass ceramic cooktop have been
used. See 
Ceramic-Glass Cooktop section in this Use and Care Guide.
Metal marks on 
ceramic glass
•  Sliding or scraping of metal utensils on cooktop surface. Do not slide metal
utensils on cooktop surface. Use a mildly abrasive cleanser to remove marks.
Brown streaks
and specks on 
ceramic glass
•  Boilovers have cooked onto surface. Use razor blade scraper to remove soil.
See instructions under 
General Care & Cleaning.
•  Cleaning materials not recommended for ceramic-glass cooktop have been
used. Use recommended cleaners and cleaning method. See Ceramic Glass
Cooktop section in this Use and Care Guide.
Areas of 
discoloration on 
ceramic glass
•  Mineral deposits from water and food. Wet surface with water and sprinkle on
a cooktop cleaning creme, Scrub with a clean damp paper towel until the stain 
disappears. Wipe remaining paste away, then apply a small amount of cooktop 
cleaning creme and polish with a clean paper towel. Use cookware with clean, 
dry bottoms. See 
Ceramic Glass Cooktop section in this Use and Care Guide.